30，introduction of lng high efficiency finned tube-威尼斯2299

introduction of lng high efficiency finned tube

the material selection of lng is very important. the main material is high-quality low temperature resistant antirust aluminum, lf21 (3a21). this brand of aluminum has high popularity, good heat transfer coefficient, low operation noise, no pollution, high energy saving and 20 years service life!

after digesting and absorbing the advanced design concepts and technologies of european and american developed countries, the large spacing and high efficiency gasification heat exchange tube with 200 mm diameter and inner fins is adopted, which effectively changes the flow form of medium in the tube, and the heat exchange effect is excellent. the optimization process design of front smooth 8 fins and back corrugated 12 outer fins. the overall strength of the equipment at low temperature is better, the heat exchange layout process is more reasonable, the heat exchange efficiency is greatly improved, and the outlet temperature meets and exceeds the rated requirements.

the liquid phase is made of lf21 (i.e. 3a21) with excellent corrosion resistance ф this kind of turbulence technology (artificial forced turbulence) is different from the simple medium direct current mode of several domestic gasifier manufacturers, which makes the liquid flowing into the gasifier in the way of turbulence, in this way, the liquid at the initial lowest temperature stage can be forced to have more sufficient heat exchange, which greatly improves the gasification effect of the whole gasifier. at the same time, the 8-piece finned tube is easier to defrost due to the large distance between the fins, which strengthens the ventilation, and is not easy to freeze and form a block between the fins. the common gasifier needs frequent defrosting, which has great relief here.

in the mixed phase and gas phase, 12 pieces of star finned tubes with internal teeth and large spacing are used, which are made of 3a21. the 12 pieces of fins with internal teeth greatly increase the heat exchange area, so that the initially gasified low-temperature liquid can be fully gasified, and it is easier for the gas to quickly rise to close to the ambient temperature.

in terms of gasification capacity: by combining the liquid phase tube technology with 8 pieces of internal teeth and the gas phase tube technology with 12 pieces of internal teeth, the gasification efficiency of the gasifier is 25% - 35% higher than that of the gasifier without this technology. the gasifier with this technology has been fully verified in the natural gas pipeline network project, which ensures that the equipment can be used continuously for 8 hours under the condition of full load. at this time, the outlet temperature is still not less than 10 ℃ of the environment. even under the condition of 0 ℃, when the outlet temperature is - 10 ℃, the equipment can still work normally, and nearly 10% of the heat exchange area is still reserved for heat supplement. all aluminum materials have been treated with anti-oxidation and anti-corrosion before leaving the factory! duel gas is a professional manufacturer of lng, including liquid nitrogen gasifier, liquid oxygen gasifier, lpg gasifier, carbon dioxide gasifier and lng gasifier. all kinds of equipment and models are complete. service hotline: 0512-81666096