hotline
86 512-8166609646,what's the difference between the definition of lng full tank and single tank? doer equipment
classification:industry publishtime:2019-09-17 14:43:26
46,what's the difference between the definition of lng full tank and single tank? doer equipment-威尼斯2299
what is the difference between the definition of lng full tank and single tank
definition of lng full capacity tank: under normal operation conditions, it is the main evaporation gas container of the tank (this case is applicable to the main container with top opening) and supports the insulation layer of the main container;
in case of leakage of the main container, all the liquid products should be stored and the air tightness of the structure should be maintained. the exhaust can be carried out, but it should be controlled (through the pressure relief system).
the annular space between the main container and the secondary container should not be more than 2m.
difference between single tank and full tank:
1. different materials
material comparison
name | inner tank | insulation layer | outer tank | remarks |
single tank | stainless steel | perlite | carbon steel | fully sealed with cofferdam |
full tank | stainless steel | perlite | stainless steel | fully sealed |
2. there are different ways to deal with the leakage of inner tank
ways to deal with leakage of inner tank
name | ways to deal with leakage of inner tank |
single tank | when the inner tank leaks, the outer tank can't stop the leakage, and all the leakage liquid flows into the cofferdam, which will form a large number of steam clouds and form multiple dangerous points after being blown away by the wind, which is not safe enough. |
full tank | when the inner tank leaks, the outer tank can reliably keep the leaking liquid, which is equivalent to two-layer closed container, and can orderly discharge and handle, with higher safety. |
3. the floor area is different
cofferdams must be built for single tank, which covers a large area. cofferdams are not needed for full tank, and the demand for land is relatively small.
4. the cost is different
because the outer wall of single tank is carbon steel, the cost is relatively low; the outer wall of full tank is made of stainless steel, and the cost is about 1 to 1.5 times that of single tank
5. different application fields
single tank: it is widely used. at present, in the existing performance, most small and medium-sized low-temperature double wall tanks use single tank
full capacity tank: the 10000m3 lng full capacity tank of yuncheng compressed natural gas built by suzhou doer gas chemical equipment co., ltd
6. comprehensive comparison
project | single tank | full tank |
area covered | many | less |
cofferdam | need | unwanted |
security | low | high |
technical reliability | high | project |
investment cost | 0.7 | 1 |
operating costs | in | low |
construction period | short | long |
construction difficulty | easy | hard |
prev: 45,what are the three types of large cryogenic tanks- doer equipmen
next: 61,technical specification for vacuum pumping of storage tank - doer equipment
news
- 205、lng operating procedures - doer equipment [2022-11-15]
- 205. tank classification and characteristics - doer… [2022-11-15]
- 204. brief introduction to tank development - doer … [2022-10-31]
- 204、lng vacuum cryogenic liquid storage tank - doe… [2022-10-31]
- 203、precautions for precooling of natural gas stor… [2022-10-28]
- 203、preparation before pressure regulation of lng … [2022-10-24]
- 3,successful test run of cangzhou ethylene storage… [2019-09-02]
- 2,advantages of suzhou doer large cryogenic tank … [2019-08-30]
- 1,congratulations on the success of one-time liqui… [2019-08-26]